TPO & Flat Roofing in Orlando, FL
Licensed CCC#1332902 · 5★ on Google · 1,000+ Orlando roofs since 2019
TPO, modified bitumen, and flat-roof systems installed and repaired by a licensed Orlando contractor. Residential flat sections, small commercial, additions, and porches — built and welded for Florida heat.
- GAF EverGuard TPO, CertainTeed Flintlastic, and torch-down systems
- Hot-air welded seams, mechanically attached or fully adhered
- Licensed CCC#1332902 · Family-owned since 2019
Or fill out the form — we respond within one business day.
Get My Free Flat Roof Estimate
No obligation. No high-pressure sales.
Heat-Welded Seams That Last
TPO is only as good as its seams. We hot-air weld every overlap with calibrated robotic welders or hand-welders for detail work, then probe-test the seams once cooled. That's how a TPO roof actually delivers its 20+ year service life in Central Florida heat.
The Right Membrane for the Job
TPO for white-reflective energy savings and the longest lifespan. Modified bitumen (CertainTeed Flintlastic, torch-down) for tight residential flat sections, small balconies, and tie-ins to existing shingle. We'll spec the membrane that matches your roof — not what's easiest to install.
Commercial-Grade Detailing on Any Size Roof
Drains, scuppers, parapet walls, HVAC curbs, and pipe penetrations are where flat roofs leak. We install reinforced flashing and target detail strips at every transition. Same craftsmanship whether it's a 400 sq ft residential flat or a 10,000 sq ft commercial deck.
Flat and low-slope roofs need a fundamentally different system than the pitched shingle, tile, or metal roof on the rest of the house. Water doesn't run off — it sits, ponds, and finds any seam or detail that wasn't built to handle it. Southern Traditions Roofing installs and repairs TPO, modified bitumen, and built-up systems across Central Florida residential flats, small commercial buildings, additions, lanais, and porches.
Our default residential flat-roof system is GAF EverGuard TPO — a 60-mil reflective membrane that reflects solar heat to lower attic temperatures, hot-air welds into monolithic seams, and carries a manufacturer warranty when installed by a certified contractor. For tighter residential flat sections, parapet tie-ins, and balcony decks, we install CertainTeed Flintlastic SA (self-adhered) and torch-down modified bitumen — the right call when a TPO sheet won't conform cleanly.
Commercial TPO replacement and repair is in our wheelhouse too — we handle small commercial flats (under 20,000 sq ft) with the same detail standard as residential. Pricing for residential flat-roof replacements typically starts around $9–$14 per square foot installed. Licensed CCC#1332902. Call (407) 579-6397 or fill out the form above.
Frequently Asked Questions
How much does a TPO roof cost in Orlando?
Residential TPO replacement typically runs $9–$14 per square foot installed, depending on tear-off complexity, insulation requirements, and detail count (drains, curbs, walls). Commercial TPO is in a similar range with volume pricing on larger jobs. We give firm written numbers after an on-site inspection — no phone quotes.
How long does TPO last in Florida?
A properly installed 60-mil TPO membrane with hot-air welded seams typically lasts 20–25 years in Central Florida. The biggest factors in real-world lifespan are seam quality (which is purely an install issue), detail flashings, and whether the roof has ponding water. We design and install around all three.
What about modified bitumen or torch-down?
Modified bitumen — CertainTeed Flintlastic and similar — is the right call on tight residential flats, lanais, parapet tie-ins, and small balconies where a TPO sheet won't conform cleanly. We install both self-adhered (peel-and-stick) and torch-down versions depending on the substrate and the surrounding system. Typical residential lifespan is 15–20 years.
Do you do commercial flat roofs?
Yes — we handle small commercial flat-roof work (typically under 20,000 sq ft) with the same crews and detail standard we use on residential. For larger commercial decks we partner with manufacturer reps to spec the right system. Licensed CCC#1332902 covers commercial roofing.
Are you licensed and insured for TPO and flat-roof work?
Yes — Florida Certified Roofing Contractor CCC#1332902. We carry general liability and workers comp. Flat-roof and TPO work requires welding equipment and seam-detailing experience most pitched-roof crews don't have, so this is worth verifying with anyone you're considering.
Florida Statute 489.147 Notice: Filing and pursuing an insurance claim is the responsibility of the homeowner. We do not negotiate with insurance carriers or adjusters, interpret policy terms, or offer rebates, deductible waivers, or anything of value in exchange for performing insurance-claim work. We provide damage inspections, photo documentation, written estimates, and emergency tarp services. If you need claim assistance, consult your insurance carrier or a licensed Florida public adjuster.
Ready to get started?
Call for a same-week free estimate. We'll give you an honest assessment and a firm written price — no pressure.
Call (407) 579-6397Prefer email? Use our contact page.